Well,

here is why I am asking. I wanted to try something different. So, over on bigblockdart.com, in the tech section, there is fellow across the pond, that made a bar system that goes under the spring plate and goes to the front bottom of the spring. Now, I made a set, and put them on the car.

Car has worn out springs that have been on the car for 30 years. I know I am going to beat up over this, but for the amount I drive the car, it was ok. It doesn't spin, car takes off straight as an arrow. The car was starting to bend the front portion of the spring. I put these homemade bars on, it stopped the bending and the car dropped the 60ft time from average 1.45 to 1.39. Now mind you the convertor isn't optimum for the engine, but it is what I have. Its a high 9 second car. It weighs 3100 with my 200lbs in it.

I just want to know, if these bars aren't great, I may get the Caltracs and new springs and move on.