Quote:

Quote:

Quote:

Updated spacers and bolt for the UCA Bracket. Just me tinkering and making things a bit better. Just checked the dates. If the arms were made after July 2013, you should be good. Check your Heim. If the misalignment spacer is Silver, you are good, if it is black, you'll want to replace the misalignment spacer with our updated sleeve adapter.

p.s. Just checked the final design drawing, The spacer may be clear zinc plated.



Mine are 4-5 years old now black spacer. Seems to be OK ? What was the issue? ( ps heim joints are holding up fine too!
)


Man, that just seems like to much anti-dive gone IMO. Was this arm designed like this for less bump steer or more camber gain? Im not hacking on anyone, just wonder what was gained somewhere else to justify throwing that much anti-dive away?




The anti dive caused a lot of bump steer.

Don't need that much anti dive in stiff sprung handing car. The factory used the same geometry in long wheelbase 71 Coronet station wagons with camping trailers as they did on Challenger T/A's.