|
Re: What aftermarket Front Disc brake setup to use 69B body
[Re: 69CHARGERMD]
#147939
11/16/08 04:38 PM
11/16/08 04:38 PM
|
Joined: Feb 2003
Posts: 1,646 Ontario,Canada
firefighter3931
top fuel
|
top fuel
Joined: Feb 2003
Posts: 1,646
Ontario,Canada
|
Quote:
Ron, Do you think my "current" MC will work with the new disc brake setup ?
I think you said 7/8" is what i need...........
thanks,,,,,,,
Doug
Doug, the drum brake MC is not the same as a disc brake unit....both reservoirs are the same size on a drum MC. The disc brake unit has a larger reservoir on the front brake reservoir. Compare the new SSBC MC to the one currently on your car and you'll see what i mean.
To measure the bore size you need to remove the MC and run a tape across the plunger to see how big it is.
Don't forget to save the small bushing that attaches to the end of your adjustable pushrod. You don't need the brake rod to fall out at the most inopportune time.
A 7/8 or 15/16 bore MC will work fine with that 4 piston setup.
Ron
|
|
|
|
|
|