The old cam was your stocker 318 2bbl cam, and there were some bent pushrods. Some of the rods measured .020-.040 shorter with the bend calculated

EDIT:The new one is the comp extreme engergy 250H cam.
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=624&sb=0

Consider the specs with a 1.6 ratio and I have alot more lift. More of a torque cam than a street terror powerhouse. I chose this route for the road-tripping torque rather than racing.

eightlitermopar

Last edited by eightlitermopar; 05/19/13 11:24 PM.