Quote: Great! Now start throwing parts at it! Did you get your k frame/front suspension stuff figured out?
No not yet, still thinking about options.
Meanwhile I'm just going to build a stock setup to get the car on the ground. I'll be using all Moog parts and rubber bushings, etc. throughout, but with 73-later spindles and BB disc brakes with BB 14" Rallye wheels. I am also building a second 8.75 rear end that I bought, I'll be using a new Dr.Diff Center section and BBP axles for the 14" BBP wheels and reproduction Goodyear Polyglass tires, and will be using stock rebuild leaf springs.
So, basically I'll have:
One setup that's all NOS parts and the stock SBP KH disc brakes, assembled, detailed and bagged, and a set of SBP Rallye wheels to go with it.
The stock original looking setup with Moog parts and a few small mods like brakes and wheel BP, going under the car for now as described above.
Then a 3rd setup with all of the upgraded handling componants which I'll install later on once I decide on the combo.
