I'm going to drag this back to the top.

I'm back at square one again. I found the 97 Ram CD, but it won't play on my computer.

The 1st post on the transmission wiring issue says the wire from the TCM and the 2nd wire from the solenoid pack and the 3rd wire from the ECU were wired together.

I believe that splice is the reason I have an intermittent converter lock up and no OD on my 46 RE. It would be easy enough to follow the wires to their source if I could get near the splice, but I can't without removing the transmission. I can get to the plug on the solenoid pack, but not the splice.

Can anyone help me with which wire/cavity the solenoid wire is on the ECU and which wire cavity is is on the TCM? I'm not finding any info on the pin out of either module. I'm using the ECU and the TCM out of a 96 Dakota, if that matters.

In a couple months the truck is going to see 1500+ highway miles and both the OD and the lock up would be nice to have.

HELP!