Andy, how high did you take it, and what was the power at the end of the pull?
We pulled 4500 to 7000 rpm. The power curve was still flat at the end of the pull. The power numbers on this pull starting at 6500 rpm are 855,854,859,861,856 and then 860 at 7000. So dead flat for the last 500 rpm. Should pull down the track pretty well in high gear.
Correction factor on these pulls was 97% so we were losing 25 hp from the correction factor. Uncorrected numbers were 885 hp. Of course, it would've been tough to hook up at the track on a 50 degree day! I think the baro was 103 kPa so air was good.
