Originally Posted by Cab_Burge
I'm thinking that your ECU should see the boost reference signal and decrease the pressure when coasting at light throttle pressure vacuum readings as well as add pressure when at WOT and additional pressure under boost, maybe not work
Maybe I'm confusing the MAP sensors job on data sharing confused shruggy


No it has the option for boost or N/A. We have it set up on N/A right now. So we just don't hook a boost line to the reg since its not boosted yet. That way the reg works like a normal reg. When we boost it we have to go into the Sniper module and change its settings to boosted and then run a line of boost pressure to the reg. Then for every pound of boost the reg compensates for. Ron

Last edited by 383man; 05/09/19 12:21 PM.