What Intake are you using? Any porting to the heads or intake?
Asking because we are hoping for 600+ HP from the 440 stroked to 505" 440 source kit with light weight crank, 10:1 compression (27cc dish) for junk gas, Trick Flow 240 with the solid roller springs and Ti retainers, checked, but nothing done to them. Lunati 40230732LK solid roller cam, 243/249 @ 0.050", 0.617"/0.624" lift with the 1.6:1 rockers. Planning to use an Edelbrock Victor intake and TTI headers. EFI might be in the future, but just going to run an old Holley 770 Ultra-avenger for the street, or maybe the 1,000 cfm HP Holley if we dyno it?