Our crank centerline was 9 7/8" we raise car 3 turns (.300)now a little under 10 1/4" higher at our track because our return road has a bump that our front end scraps. Front of car was at 3".
Front spring are 225#, pinion angle 1.0,front shocks are 1 turn off tight, I'll have to recheck rear shock setting, rear steer 1/16",anti roll hanging -1/2 flat short,front frame height 3" / rear height 5" at 4-link, 6 psi in tires, set wheelie bar at 5" to 5 1/2" depending on track. Going to a single wheelie bar took off 11# off rear,battery weight is 9.2# also.

Maybe you can use some of the info good luck.

How much timing do you run and what compression & cu. in.?

For oil pan ours is a Charley's from Indy fits good with diaper, could send pic's.