Says it all about the OTS [Email]cr@p[/Email] most of us settle for with 112 and 114 install lines....
I have a 106* LSA in at 106* ICL 238/242 @ .050"
And Im thinking you would almost certainly be getting better low and mid range torque than if you bought one of the off the shelf cams available and just put it in straight up.
I did a Bullet .583 .583 234 238 @.050 on a 110 in at 106 and am going to use a modman with 2 500 eddies I put a loose 10 inch converter in it with 4.10 gears once I get it going I will report
I think we'd all be interested in that Biff...or should be...
