As long as there has been some interest in this project, why not have some thoughts on what sort of power/ torque this thing might make ...I realize it's a shot in the dark to some extent because of the wildcard intake setup, and they might leave 100hp on the table but I'm curious to see what the general consensus might be.... Then look back when I dyno it and compare numbers
Here's the basic specs
440 Blk. Program caps
Eagle rods 6.76
Eagle crank 4,15
Ross custom dished pistons approx 9-1
Indy 440-1 heads decent flow #s but I can't find the flow sheets. They do have the 2.25 valves though
Cam Solid Flat Tappet
.576 lift
274 adv dur
[Email]246@.050[/Email]
114 lsa
Turbos Borg Warner
S400-64mm compressor
83 x 74, 1.10 A/R T6 Turbine
Carbs are Holley 450's set up for blowthru
We will probably try to figure out tunes for race gas(110) and one for pump gas (91) as well
So....... What do you all think??