Quote:

ive pulled the intake and dont see any indication of oil being sucked in,ports are wet from fuel but not oily.
if anyone has a completly stock street hemi they dont mind throwing a vac gauge on i am curious what the reading should be.
i wasnt impressed with 140 psi comp reading until i checked the service manual and it says 110 psi is the acceptable minimum.cam lobes appear fine at a glance. i think i will pull the timing cover next.




I just did a compression check beginning of October on a stock hemi, standard bore, resto cam, ect.

It reads 160# - 175# all 8 cylinders.


Last edited by pacifica; 11/14/13 11:29 PM.