How much room did you have on the spindles?

When I did my 8 piston calipers on the same diameter rotor it was a really tight fit. There was only one place I could mount the calipers and that spot allowed about 1/2" of wiggle room. The lower ball joint, upper control arm, and sway bar prevented stuffing it anywhere else.

I kept my TSM rear lower bracket adding spacers to bring them into position. The biggest difference being that I kept the 8-3/4" rear end.


We are brothers and sisters doing time on the planet for better or worse. I'll take the better, if you don't mind.
- Stu Harmon