Quote:

---

Quote:

---

Seriously look at the 200...

http://www.bigblockdart.com/forum/showthread.php?21132-Going-with-200R4-transmission-in-my-Dart

I have a 4L60E in my '95 GMC 1/2 ton. It is fine, but 1st to 2nd is just a large drop in RPM. If the torque is there to power through it, might not matter much. If I remember correctly the 60 is just an updated 700 (that might be oversimplifying a bit). They can be built too, but consider an 4L80 while you are at it if you are going down the 60 route.

---

4L80 is a HUGE tranny compared to the 60 and would require tbar/floor mods....if you're doing that, I'd go with a 518/46RH

---