Threads Created By ADakotaRTGuy

Threads Created \| All Posts Threads Created By ADakotaRTGuy
Title	Forum	Post Time
Cam Thoughts	Unlawfl's Race & Engine Tech	02/23/15 01:08 AM
suspension thoughts...video critique	Unlawfl's Race & Engine Tech	05/17/13 10:17 PM
Ran the 440 small block Dakota - Thoughts?	Unlawfl's Race & Engine Tech	03/10/13 07:43 AM
Protecting Wires from headers	Unlawfl's Race & Engine Tech	02/27/13 01:34 AM
How close are the dimentions for W5 and W9 headers?	Unlawfl's Race & Engine Tech	06/16/11 06:23 PM
Turbo size? Opinions welcome.	Unlawfl's Race & Engine Tech	05/28/11 08:53 PM
Jesel or T&D for W9 Heads on a Magnum Race block?	Unlawfl's Race & Engine Tech	05/09/11 08:37 PM
Alternator mounting w/W9's and a Crank Trigger w/ FAST	Unlawfl's Race & Engine Tech	05/08/11 08:39 PM
PCV Valve or not for a turbo?	Unlawfl's Race & Engine Tech	04/28/11 08:32 PM
Valve Covers for W9 heads?	Unlawfl's Race & Engine Tech	04/28/11 08:25 PM
Magnum Race block coolant modifications?	Unlawfl's Race & Engine Tech	04/21/11 07:26 PM
Relocated Alternator using a Late model Alternator?	Unlawfl's Race & Engine Tech	04/13/11 08:32 PM
Rear Truck Chassis Opinions, box or X brace	Unlawfl's Race & Engine Tech	03/25/11 07:04 PM
W9's on a 59 degree block with Fuel Injection	Unlawfl's Race & Engine Tech	03/15/11 08:24 PM
Good sources for a carbon Fiber driveshaft?	Unlawfl's Race & Engine Tech	02/19/11 08:40 PM
Reputable 727 builder in the Northeast - MD/NJ/DE	Unlawfl's Race & Engine Tech	02/13/11 08:05 PM
Comp Camps Solid Roller R3/Magnum Race block lifters	Unlawfl's Race & Engine Tech	01/15/11 06:45 PM
Rods for about 750 RWHP in a heavy vehicle.	Unlawfl's Race & Engine Tech	11/08/10 08:32 PM
4.25 stroke with a 6.125 rod - good, bad, opinions?	Moparts Question and Answer	09/01/10 10:11 PM
Which heads to go with...Edelbrock or Indy 360-...	Unlawfl's Race & Engine Tech	08/29/10 07:34 PM

Page 1 of 2