|
Hit the DYNO! Results are IN Now with VIDS
#650005
03/24/10 01:23 PM
03/24/10 01:23 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Looks like Scott has been busy in the last week cuz he called me to tell me we should be ready to make some pulls tomorrow. 
I knew we were getting close but I thought we had a little more to do 
Here's a recap just to rehresh everyones memory. 
72 440 block bored .030 decked so pistons are .010 in the hole
Wiesco Pro Tru pistons 12.05-1 compression
K1 rods
Facotry forged crank turned .010/.010 and balanced.
Cam
Comp cams Magnum series
Duration at .050" Lift 262 int./262 exh
Actual lift using 1.6 intake and 1.5 exh 578 int and 555 exh.
Installed at 108.5*'s
Edelbrock heads
Milled to .064 cc chambers
Hand ported By Scott Koffel
Flow data.....
Lift/int/exh
.100/83.05/69.55
.200/161.46/113.46
.300/230.23/143.98
.400/280.46/178.41
.500/312.75/200.32
.600/317.25/214.40
.700/319.50/222.23
.800/319.50/228.49
Team G intake worked and matched to heads
APD built 950HP alky carb
2 1/8 hooker SC w/ 3.5 collectors
MSD dist W/ Fircore 50's
Hope I didn't leave anything out
Anyone have any thoughts on what it might put out?
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: Moparnut426]
#650008
03/24/10 01:46 PM
03/24/10 01:46 PM
|
Joined: Jul 2005
Posts: 1,472
Overland Park, KS.
Joshs68
pro stock
|
pro stock
Joined: Jul 2005
Posts: 1,472
Overland Park, KS.
|
never tried to guess before but looks like about 610hp/585tq
?
good luck,
looks like a nice build to me!
Last edited by Joshs68; 03/25/10 06:20 AM.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: Moparnut426]
#650010
03/24/10 02:08 PM
03/24/10 02:08 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
535.62 HP
669.1 FT LBS
Nice build, glad to see shes getting close!!
That's about what my old motor made
Here's the specs on that one
Quote:
440, .030 over
cast crank
6LY rods
hyper pistons sitting .070 in the hole
CR is 8.6 to 1
OOTB Eddy heads (Intake Valve Diameter (in) 2.140 in. Exhaust Valve Diameter (in) 1.810 in.)
Cam, (solid lift)
Intake Valve Lift with 1.5 Ratio 0.555 in.
Exhaust Valve Lift with 1.5 Ratio 0.555 in.
Duration at 050 inch Lift 262 int./262 exh.
Did NOT degree it in just lined up the dots but..
Lobe Separation (degrees) 110
Intake Centerline: 106
Team G intake
750 BG claw (running 110 oct)
MSD dist locked out @ 38*s
2 1/8 hooker SC headers.
And it's sheet
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650014
03/24/10 02:38 PM
03/24/10 02:38 PM
|
Joined: Feb 2007
Posts: 5,080
organ
maximum entropy
master
|
master
Joined: Feb 2007
Posts: 5,080
organ
|
it shall make the power of 5,000 oldsmobile cutlass supremes!
for what is the good life if not doing things thoughtfully?
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: tboomer]
#650017
03/24/10 03:06 PM
03/24/10 03:06 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
632 HP 579 FT.LBS. TORQUE LOOKS LIKE YOU BE A 10.60 RIDE.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650020
03/24/10 03:25 PM
03/24/10 03:25 PM
|
Joined: Jun 2009
Posts: 644
Minnesota
Barnstorm
mopar
|
mopar
Joined: Jun 2009
Posts: 644
Minnesota
|
Plenty of headder for that motor, Bill..maybe alky wants more.
The little old lady from Pasadena is back!
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650022
03/24/10 03:29 PM
03/24/10 03:29 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
Bill what was it last time on alky? I assume your
going straight to alky with that carb
After a little tweaking it made 622hp on alky last time.
We'll be using a gas carb to break it in and seat the rings then it's all Booze after that 
Mike, my dad is in the same boat. He has to work but I'm hoping he can leave a little early and watch some of the pulls. 
I'm sure there will be a few things we need to button up as well as breaking it in.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
#650024
03/24/10 03:41 PM
03/24/10 03:41 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
what does the winner get Wild Billy?
 
Have to see if I can come up with anything  
I could always send ya my old timing chain
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: emarine01]
#650026
03/24/10 04:21 PM
03/24/10 04:21 PM
|
Joined: Jan 2007
Posts: 3,695
nc
emarine01
master
|
master
Joined: Jan 2007
Posts: 3,695
nc
|
Quote:
I am goin 715 @ 7k and 570 torque @ 5300 
Oopps, I thought that 262 cam was a roller so.... 685hp and 565tq 
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650028
03/24/10 05:38 PM
03/24/10 05:38 PM
|
Joined: Nov 2004
Posts: 2,825
Sk. Canada
RemCharger
master
|
master
Joined: Nov 2004
Posts: 2,825
Sk. Canada
|
Quote:
Quote:
Bill what was it last time on alky? I assume your
going straight to alky with that carb
After a little tweaking it made 622hp on alky last time.
We'll be using a gas carb to break it in and seat the rings then it's all Booze after that
Mike, my dad is in the same boat. He has to work but I'm hoping he can leave a little early and watch some of the pulls.
I'm sure there will be a few things we need to button up as well as breaking it in.
So did it make 535 or 622? How many motors are you talking about?
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: RemCharger]
#650030
03/24/10 06:14 PM
03/24/10 06:14 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
So did it make 535 or 622? How many motors are you talking about?
Sorry, didn't mean to confuse anyone 
It made 535hp on gas as it came out of the car.
We then put an 850 APD alky carb on it and made a few timing changes and got it up to the 622hp.
it was on the same motor just the 2 different fuels
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650031
03/24/10 06:31 PM
03/24/10 06:31 PM
|
Joined: Oct 2003
Posts: 21,345
Marysville, O-H-I-O
70Cuda383
Too Many Posts
|
Too Many Posts
Joined: Oct 2003
Posts: 21,345
Marysville, O-H-I-O
|
you picked up nearly 100 HP just by switching to alcohol?! I may need to reconsider my reluctance to switch to E85!
**Photobucket sucks**
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
#650033
03/24/10 07:07 PM
03/24/10 07:07 PM
|
Joined: Oct 2003
Posts: 996
Queens, New York
Harley
super stock
|
super stock
Joined: Oct 2003
Posts: 996
Queens, New York
|
Quote:
632 HP
579 FT.LBS. TORQUE
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: 70Cuda383]
#650034
03/24/10 07:20 PM
03/24/10 07:20 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
We also increased the plug gap and retarded the timing 3 deg
Scott sent me some pics he took to update everyone as to where the motor is now
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650038
03/24/10 08:49 PM
03/24/10 08:49 PM
|
Joined: Jan 2007
Posts: 3,695
nc
emarine01
master
|
master
Joined: Jan 2007
Posts: 3,695
nc
|
Quote:
Bill is the port on the back of the intake for a lean
out valve... looks good... when will you hit the dyno
Lean out valve, whats that about 
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: emarine01]
#650039
03/24/10 08:57 PM
03/24/10 08:57 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Quote:
Bill is the port on the back of the intake for a lean
out valve... looks good... when will you hit the dyno
Lean out valve, whats that about
You have a valve inside the car to open up so it will
lean the engine out so you built heat... for alky
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650040
03/24/10 09:05 PM
03/24/10 09:05 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
Bill is the port on the back of the intake for a lean
out valve... looks good... when will you hit the dyno
That port was on the intake when I bought it (swap meet  ) But yes, I was planning on using it for a leanout valve.
Unless that's not a good spot for it. 
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: emarine01]
#650041
03/24/10 09:05 PM
03/24/10 09:05 PM
|
Joined: Mar 2004
Posts: 1,371
Tallmadge, Ohio
Butch
pro stock
|
pro stock
Joined: Mar 2004
Posts: 1,371
Tallmadge, Ohio
|
Awesome Bill and fantastic work Scott. Good luck on with the pulls. I'll say 665 hp. Butch
'74 Duster 440
'04 Hemi Quad Cab Ram
'06 Pacifica
'78 MGB
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: B1Fish540]
#650043
03/24/10 09:29 PM
03/24/10 09:29 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
Now, put it thru the paces! 
Tomorrow after noon
Wanna bet I don't sleep much tonight
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650045
03/24/10 09:33 PM
03/24/10 09:33 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Tomorrow after noon
Wanna bet I don't sleep much tonight
Afternoon will you be done tomorrow
with numbers tomorrow night? either way... good luck
and HAVE FUN
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650046
03/24/10 09:39 PM
03/24/10 09:39 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
I'll have my laptop out there so I'll do my best to post them before I even leave there
Pics (if I have a chance to take any that are worth posting) would be up hopefully in the evening.
Sheets have to go to my parents house to get scanned and video takes me a while to edit and upload so I will do my best to get all that to you guys as quick as I can.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650049
03/24/10 09:57 PM
03/24/10 09:57 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
I'm pretty sure we would believe you if you just
stated your numbers.... LOL... pretty sure 
Now come on 
You know that's not my style 
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: Cheatham]
#650051
03/24/10 10:05 PM
03/24/10 10:05 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
Hey Wild Bill is APD Carbs the same company as AED carbs or is it different company??
No, they're not the same
APD carbs
AED carbs
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: 340RICK]
#650054
03/24/10 11:27 PM
03/24/10 11:27 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
how much did you say your car weighed? i was thinking you posted it before but i forgot.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
#650056
03/24/10 11:47 PM
03/24/10 11:47 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
how much did you say your car weighed? i was thinking you posted it before but i forgot.
Its 2800 and change, I think he said 2860
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: HEMI472]
#650057
03/24/10 11:48 PM
03/24/10 11:48 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Dram, It weighs 2820 w/o me
HEMI472, He's not telling me 
And he's having a ball keeping me in suspence 
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650058
03/24/10 11:52 PM
03/24/10 11:52 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Dram, It weighs 2820 w/o me
HEMI472, He's not telling me
And he's having a ball keeping me in suspence
Bill whats the weight with you... 2930
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650059
03/25/10 12:10 AM
03/25/10 12:10 AM
|
Joined: Jul 2003
Posts: 12,129
Cleveland
sunroofgtx
I Live Here
|
I Live Here
Joined: Jul 2003
Posts: 12,129
Cleveland
|
I'll be the first to say it.. 701@6800 & 666 tq $1 Bob..
Join the quickest team in motorsports. Team FireCore. CustomWiresets.com
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: HEMI472]
#650062
03/25/10 12:27 AM
03/25/10 12:27 AM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Very funny Raff 
hemi, that's not a bad idea
Sparky, you coming
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: RemCharger]
#650072
03/25/10 02:36 PM
03/25/10 02:36 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
It's ALIVE
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650074
03/25/10 02:41 PM
03/25/10 02:41 PM
|
Joined: Aug 2003
Posts: 11,179
Atco NJ
DJVCuda
I Live Here
|
I Live Here
Joined: Aug 2003
Posts: 11,179
Atco NJ
|
Quote:
It's ALIVE
|
|
|
Post deleted by Defbob
[Re: WILD BILL]
#650075
03/25/10 02:42 PM
03/25/10 02:42 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
#650076
03/25/10 03:01 PM
03/25/10 03:01 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
seating the rings and checking lash
So far so good
|
|
|
Re: Hitting the DYNO today ! What's it gonna make now??
[Re: WILD BILL]
#650078
03/25/10 03:22 PM
03/25/10 03:22 PM
|
Joined: Jan 2003
Posts: 16,928
NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,928
NC
|
Quote:
72 440 block bored .030 decked so pistons are .010 in the hole
Wiesco Pro Tru pistons 12.05-1 compression
K1 rods
Facotry forged crank turned .010/.010 and balanced.
Cam
Comp cams Magnum series
Duration at .050" Lift 262 int./262 exh
Actual lift using 1.6 intake and 1.5 exh 578 int and 555 exh.
Installed at 108.5*'s
Edelbrock heads
Milled to .064 cc chambers
Hand ported By Scott Koffel
Those are some good flowing Eddie (RPM?) heads. It is a street/strip type cam (IMO), so with the alky I am thinking 646 hp.
I am curious about the power curve and torque peak with those 2-1/8" headers on a 446 CID. How long are the primaries?
Looking forward to the results.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: sunroofgtx]
#650079
03/25/10 03:27 PM
03/25/10 03:27 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650081
03/25/10 03:48 PM
03/25/10 03:48 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Quote:
I'll be the first to say it.. [Email]701@6800[/Email] & 666 tq
$1 Bob..
Nailed it.. Gorski wins
You wish Rick
Those are some big numbers Bill
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: MR_P_BODY]
#650083
03/25/10 04:33 PM
03/25/10 04:33 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Don't beleive Sparky Mike
Yes, I'll post the #'s
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650085
03/25/10 04:39 PM
03/25/10 04:39 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Don't beleive Sparky Mike
Yes, I'll post the #'s
So have you got the rings seated and starting to make
some serious pulls yet..... and we all know that I'm
going to win
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: galen]
#650087
03/25/10 04:49 PM
03/25/10 04:49 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
OK, here's the results
759 hp @ 7400 rpm
603 ft lbs @ 5800 rpm.
Best thing is no leaks and it didn't blow
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650092
03/25/10 04:59 PM
03/25/10 04:59 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
So Bill.... I'm guessing your car weighs 3000 with you in it at race weight and with that power I will be expecting to see some passes in the 9.10 area... good numbers
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: roadhazard]
#650093
03/25/10 05:03 PM
03/25/10 05:03 PM
|
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
Quote:
Hey guys sorry I can't be there today
My unedumacated guess
732 HP
647 TQ
Quote:
Best thing is no leaks and it didn't blow
Well I guess my gaskets and seals worked
|
|
|
Re: Hitting the DYNO today ! Results are IN
[Re: WILD BILL]
#650094
03/25/10 05:09 PM
03/25/10 05:09 PM
|
Joined: Jan 2003
Posts: 7,495
Minnesota
Hemi_Joel
master
|
master
Joined: Jan 2003
Posts: 7,495
Minnesota
|
Wow, those are some very impressive numbers for a small motor with a small flat tappet cam. What's your secret? Is the alky worth that much?
[img]http://i.imgur.com/boeexFms.jpg[/img]31 Plymouth Coupe, 392 Hemi, T56 magnum RS23J71 RS27J77 RP23J71 RO23J71 WM21J8A I don't regret the things I've done. I only regret the things I didn't do. "Wise men talk because they have something to say; fools because they have to say something. ~ Plato"
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650101
03/25/10 06:08 PM
03/25/10 06:08 PM
|
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
rickstershemi
master
|
master
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
|
Quote:
OK, here's the results
759 hp @ 7400 rpm
603 ft lbs @ 5800 rpm.
Best thing is no leaks and it didn't blow
Did you test that on Eddie Miller's Dyno 
Just kidding....very impressive numbers to say the least.....congrats
Trickster
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: rickstershemi]
#650102
03/25/10 06:15 PM
03/25/10 06:15 PM
|
Joined: Jan 2003
Posts: 7,495
Minnesota
Hemi_Joel
master
|
master
Joined: Jan 2003
Posts: 7,495
Minnesota
|
Quote:
Did you test that on Eddie Miller's Dyno
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650103
03/25/10 06:17 PM
03/25/10 06:17 PM
|
Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
cudadoug
master
|
master
Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
|
Quote:
Quote:
So did it make 535 or 622? How many motors are you talking about?
Sorry, didn't mean to confuse anyone
It made 535hp on gas as it came out of the car.
We then put an 850 APD alky carb on it and made a few timing changes and got it up to the 622hp.
it was on the same motor just the 2 different fuels
What the....?? 87 HP just on going to Alky and "a few timing changes"????????? YIKES!!!! That's HUGE!!!
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: 72chrgrally]
#650107
03/25/10 07:00 PM
03/25/10 07:00 PM
|
Joined: Jul 2005
Posts: 8,647
ELYRIA,OH
blownzoom440
|
Joined: Jul 2005
Posts: 8,647
ELYRIA,OH
|
here is a teaser picture.1 of the earlier pulls.
Last edited by METAL STORM; 03/25/10 07:02 PM.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: RyanJ]
#650108
03/25/10 07:02 PM
03/25/10 07:02 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
I'm confused.... was the old combination (unported Edelbrocks, sub 9:1 motor, the one that made 622 HP) the one that ran the 10.96 in your sig? & your car weighs around 3000 lbs race weight (assuming you weigh 180 lbs)? (2820 car weight) Is that all correct?
Yes.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650111
03/25/10 07:27 PM
03/25/10 07:27 PM
|
Joined: Jan 2003
Posts: 8,547
State College, PA
RyanJ
moparts member
|
moparts member
Joined: Jan 2003
Posts: 8,547
State College, PA
|
Quote:
Quote:
I'm confused.... was the old combination (unported Edelbrocks, sub 9:1 motor, the one that made 622 HP) the one that ran the 10.96 in your sig? & your car weighs around 3000 lbs race weight (assuming you weigh 180 lbs)? (2820 car weight) Is that all correct?
Yes.
Good I'm not as confused as I thought I was..... LOL
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: jim sciortino]
#650114
03/25/10 07:41 PM
03/25/10 07:41 PM
|
Joined: Feb 2006
Posts: 1,051
The Great White North
RAMM
super stock
|
super stock
Joined: Feb 2006
Posts: 1,051
The Great White North
|
Is this corrected to STP (Standard Temperature Pressure) or is it the J1349 standard? Just out of curiosity--What were the BSFC's, BMEP, BSAC's? Honestly that is one stout motor for sure-all things considered. You are making 1.7 HP/ci! J.Rob
2009 PHR\EMC Competitor
2010 PHR\EMC Competitor
2011 PHR\EMC Competitor
2012 PHR\EMC Competitor
2013 PHR\EMC Competitor
2014 HotRod/EMC Competitor
2015 HotRod/EMC NoShow
2016 HotRod/EMC 3rd place SPEC Bigblock
2018 HotRod/EMC 7th place G3
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: BigDog68Dart]
#650115
03/25/10 07:42 PM
03/25/10 07:42 PM
|
Joined: Jan 2003
Posts: 4,852
KENTUCKY
69CHARGERMD
master
|
master
Joined: Jan 2003
Posts: 4,852
KENTUCKY
|
Congrats Bill...going to be cool.......... Question... What was your OLD MPH in the 1/4 Was that 622 HP on GAS congrats....
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: RyanJ]
#650117
03/25/10 08:04 PM
03/25/10 08:04 PM
|
Joined: Nov 2004
Posts: 2,119
sc
tjmarcus1
top fuel
|
top fuel
Joined: Nov 2004
Posts: 2,119
sc
|
Quote:
I'm confused.... was the old combination (unported Edelbrocks, sub 9:1 motor, the one that made 622 HP) the one that ran the 10.96 in your sig? & your car weighs around 3000 lbs race weight (assuming you weigh 180 lbs)? (2820 car weight) Is that all correct?
& now the new motor makes 760, with same off shelf Comp cam (if I'm reading all this right) & is going in same 3000 lb car?
If I've got all that right... will be interesting to see what car picks up @ track VS old combo.
i can't wait to see what it runs
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: BigDog68Dart]
#650118
03/25/10 08:09 PM
03/25/10 08:09 PM
|
Joined: Jan 2004
Posts: 13,247
Mt. Vernon, Ohio
dartman366
I Live Here
|
I Live Here
Joined: Jan 2004
Posts: 13,247
Mt. Vernon, Ohio
|
Quote:
Bill, great numbers! and again with who is working on it, I would expect nothing less! You and me in 10.00 first round, Be Easy on me!
Dang Larry, you beat me to it, Nice number's Bill, may have to drag that old scuzzy looking 440 block out that I just got and start dreaming.
Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: RyanJ]
#650121
03/25/10 08:22 PM
03/25/10 08:22 PM
|
Joined: Jan 2003
Posts: 6,591
Canton, Ohio
Sport440
master
|
master
Joined: Jan 2003
Posts: 6,591
Canton, Ohio
|
Quote:
Quote:
Quote:
I'm confused.... was the old combination (unported Edelbrocks, sub 9:1 motor, the one that made 622 HP) the one that ran the 10.96 in your sig? & your car weighs around 3000 lbs race weight (assuming you weigh 180 lbs)? (2820 car weight) Is that all correct?
Yes.
Good I'm not as confused as I thought I was..... LOL
To be clear he ran the 10.96 @ 540 HP
The Same said motor was later ran on Alky on the Dyno and made 622 HP with no track ETS mike.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650122
03/25/10 08:35 PM
03/25/10 08:35 PM
|
Joined: Jan 2003
Posts: 16,928
NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,928
NC
|
Quote:
OK, here's the results
759 hp @ 7400 rpm
603 ft lbs @ 5800 rpm.
Best thing is no leaks and it didn't blow
WOW!
Those are some serious numbers. That should move your weight car down the track at an impressive rate.
7400 rpm = good flowing heads and not big CID
I am really surprised by the rpm (TQ & HP) with that cam.
Gaining that much power from the old 622 hp engine, should be worth almost 1 second in the 1/4 mile, and 1.5 from the 540 hp. You will feel that!
Look for some mid 9's 
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: Sport440]
#650123
03/25/10 09:12 PM
03/25/10 09:12 PM
|
Joined: Jan 2003
Posts: 4,070
Shelby Twp. Mi
HardcoreB
master
|
master
Joined: Jan 2003
Posts: 4,070
Shelby Twp. Mi
|
Quote:
To be clear he ran the 10.96 @ 540 HP
The Same said motor was later ran on Alky on the Dyno and made 622 HP with no track ETS mike.
I just ran some numbers at Wallace racing. Was it a 10.96 @ 130 MPH?
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: 440Jim]
#650124
03/25/10 09:14 PM
03/25/10 09:14 PM
|
Joined: Jul 2003
Posts: 12,129
Cleveland
sunroofgtx
I Live Here
|
I Live Here
Joined: Jul 2003
Posts: 12,129
Cleveland
|
It was amazing watching this happen today. 60 horse difference, swapping nothing but to alky. Watched it and helped hold the carb for the 2 inch APD Black Widow spacer. 60 horse switching to jungle juice!! I don't think the engine ever went above 143 degrees ! Thanks for letting me be a fly on the wall, guys..
Join the quickest team in motorsports. Team FireCore. CustomWiresets.com
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: WILD BILL]
#650128
03/25/10 09:51 PM
03/25/10 09:51 PM
|
Joined: Jan 2003
Posts: 15,439
Val-haul-ass... eventually
BradH
Taking time off to work on my car
|
Taking time off to work on my car
Joined: Jan 2003
Posts: 15,439
Val-haul-ass... eventually
|
Quote:
OK, here's the results
759 hp @ 7400 rpm
603 ft lbs @ 5800 rpm.
So, is alcohol worth 150 HP over gas? Because those #s make no sense at all for the combination, unless alky makes that big of a difference.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: 70blackfish]
#650135
03/26/10 12:10 AM
03/26/10 12:10 AM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
SOrry but I had some things to work on at the shop and just got home recently.
I'll do my best to try and answer everyones ?'s Quote:
wow way to go bill. is there any chance you could do a back to back test between race gas and alcohol?just wondering what the power diffrence would be.well it looks like i just better keep my car at home this year lol. Mopar65
Yes, we actually did 3 pulls on race gas after seating the rings.
On race gas it made 712 hp @6900 & 564 ft#'s @ 5600 .
On alky it made 747hp @ 6900 & 606 ft#'s @ 5800
Everything about those 2 pulls were the same except the carb and the fuel
Quote:
Is this corrected to STP (Standard Temperature Pressure) or is it the J1349 standard? Just out of curiosity--What were the BSFC's, BMEP, BSAC's? Honestly that is one stout motor for sure-all things considered. You are making 1.7 HP/ci! J.Rob
RAMM
The #'s are "corrected." To what I Don't know. I hope the other info you requested is on the sheets. I'm not familiar with those temrs so I hope the info you want is on the dyno sheets. I'll post them with their persppective vid as soon as I can.
Quote:
Congrats Bill...going to be cool..........
Question...
What was your OLD MPH in the 1/4
Was that 622 HP on GAS
congrats....
69CHARGERMD
I was turing around 118 mph on avaerage. The 622hp pull from the old motor was on alky.
Quote:
I just ran some numbers at Wallace racing. Was it a 10.96 @ 130 MPH?
HardcoreB
NO, I beleive I went 120 mph on that pass
Quote:
So, is alcohol worth 150 HP over gas? Because those #s make no sense at all for the combination, unless alky makes that big of a difference.
Captain Budget!
No, Look at the the gas vs alky pulls I posted above. Everything on those were the same including what we pulled the motor to. Alky is worth a bit more but not 150 hp.
Quote:
How much can your block take?
70blackfish
Hope fully it can handel what we put it in
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: sunroofgtx]
#650136
03/26/10 12:13 AM
03/26/10 12:13 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
wow, that's incredible. you should be looking at 9.15-9.20 1/4 mile E.T. at around 141+ MPH now at 3000 lbs race weight. when you get a chance to look over all the dyno information, would you mind posting the fuel flow and the BSFC numbers at peak horsepower.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: HEMI472]
#650138
03/26/10 12:32 AM
03/26/10 12:32 AM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
well did you ask scott how much power before the first pull???????
Yes and he said 735-745
Dram, I think I found what your asking for. There is a colounm marked BSFC in Lb/Hphr. Is that it?
If so it was 1.024 for the 759 hp @ 7400
Here's all the pics from today
Now I get to get moving on downloading, editing and host the vids of the runs.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make now??
[Re: sunroofgtx]
#650139
03/26/10 01:38 AM
03/26/10 01:38 AM
|
Joined: Sep 2008
Posts: 2,840
Flint, Michigan
B1Fish540
master
|
master
Joined: Sep 2008
Posts: 2,840
Flint, Michigan
|
Quote:
Quote:
Quote:
OK, here's the results
759 hp @ 7400 rpm
603 ft lbs @ 5800 rpm.
So, is alcohol worth 150 HP over gas? Because those #s make no sense at all for the combination, unless alky makes that big of a difference.
i think he may be thinking of the old motor. It got, iirc, 535 HP on gas and 622 HP on Alky..or he may be comparing the old alky number (622) to the new alky number(759)..still not 150 HP but could be construed that way, i guess
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: blown572dart]
#650146
03/26/10 09:06 AM
03/26/10 09:06 AM
|
Joined: Mar 2004
Posts: 826
Georgia
66coronet
super stock
|
super stock
Joined: Mar 2004
Posts: 826
Georgia
|
Those are really good numbers. Koffels is impressive for sure.
All the dyno sheets show 35 degrees locked out. Did the timing stay there for all the pulls? (I didnt have time to look at the videos, sorry if I missed something there) That is surprising to me. My car/motor has always liked a little more timing than that, but I guess every ignition system and balancer are a little different. Sorry if you covered this in an earlier post, do you remember where the cam is degreed in at?
I am anxious to see how it runs in your car. I bet it will be sub 9.50s for sure. Are you planning any more upgrades or changes on your car as far as headers, fuel delivery or converter?
That should be a fun ride for sure.
We really like those body lines.
Last edited by 66coronet; 03/26/10 11:00 AM.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: blown572dart]
#650147
03/26/10 09:12 AM
03/26/10 09:12 AM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Raff, I would be astounded if it comes anywhere near the ET in your sig. I'm really hoping it will get into the high 9's so don't be looking for me to challange you to a heads up race
MD, Dad and I were discussing where the next weak link might be. Hopefully I don't find anything any time soon. I have a billet drum in the trans and a blanket so I'm feeling good about that. Over the time I've had this car I've tried to build it so it would be ready for more motor when I got the money for it. All I can do at this point is hoipe for the best.
Dustergirl, I hope your right but I'm not going there till I have a time slip
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: WILD BILL]
#650148
03/26/10 09:44 AM
03/26/10 09:44 AM
|
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
Those are some impressive numbers Bill! Scott added about 135 HP with compression and porting  You just blew my program out of the watter Are these tears of joy? Or tears of booze?
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: WILD BILL]
#650149
03/26/10 09:50 AM
03/26/10 09:50 AM
|
Joined: Feb 2003
Posts: 3,998
GO BUCKS !!!!!!!
340RICK
master
|
master
Joined: Feb 2003
Posts: 3,998
GO BUCKS !!!!!!!
|
That looks like BIG FUN Congrats guys a job well done. It just amazing how some combinations really like Alky and others not so much. Looking forward to seeing you at the first CRT 10.00 shootout.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: Thumperdart]
#650152
03/26/10 01:04 PM
03/26/10 01:04 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
Man, that`s one STOUT combo you`ve got there........would u mind giving the specs on the spacer and do they make one for a dommy? Thankxx...
I'll do some looking and see what I can find out
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: Cheatham]
#650155
03/26/10 02:53 PM
03/26/10 02:53 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
Wild Bill i may have missed it but did you try adding more timing and fattening up the carb some? i would think it would kill the peak numbers slightly but put bigger numbers at a lower rpm. alcohol motors seem to just keep making power by adding more jet. I see some guys asking if methanol makes that much more power i believe its 10-15% more than gas.
No, you didn't miss it. We didn't do either. Come to think of it, We didn't even have to tweak the 4 corner idle screws.
Thumper, here's the spacer. Black Widow Carb Spacer. Yes they have them for both the 4150 and 4500 carbs. It's a slick piece. It starts as a 4 hole then transitions to an open.
Scott wouldn't let me walk out the door with it
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: roadhazard]
#650157
03/26/10 03:12 PM
03/26/10 03:12 PM
|
Joined: Sep 2008
Posts: 2,840
Flint, Michigan
B1Fish540
master
|
master
Joined: Sep 2008
Posts: 2,840
Flint, Michigan
|
Quote:
Those are some impressive numbers Bill!
Scott added about 135 HP with compression and porting
You just blew my program out of the watter
I hear ya...I wonder why i bother with B1 heads!
j/k, Scott. Edlebrock is supposed to come out with a Perfromer RPM Xtreme head in the near future...wonder what Scott could do with those?!
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: B1Fish540]
#650160
03/26/10 03:54 PM
03/26/10 03:54 PM
|
Joined: Mar 2006
Posts: 1,402
State of Corruption
camdog440
pro stock
|
pro stock
Joined: Mar 2006
Posts: 1,402
State of Corruption
|
Wild Bill, What oiling mods have been done to the block? Do you have Hardblock or a girdle? I look forward to seeing what it will run!! I wonder if you'll have the quickest 446" on the "moparts fastest" list?
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: camdog440]
#650162
03/26/10 04:10 PM
03/26/10 04:10 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Scott didn't want to pull it any higher becuase of the cam and springs. He didn't to float the valves. Quote:
Wild Bill,
What oiling mods have been done to the block?
We put the crossover oiling tube in and a restricor in the head to control oil to the top
Do you have Hardblock or a girdle?
No
I look forward to seeing what it will run!!
I wonder if you'll have the quickest 446" on the "moparts fastest" list?
I doubt it. There are some bad a$$ cars on this site
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: emarine01]
#650165
03/26/10 05:10 PM
03/26/10 05:10 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Dom, I have to get me one too Quote:
There is a lot of beauty in makin big power with out big dollar parts, some builders seem to have figured his out, Bigger is not always better
I beleive that was Scott's goal all along. When we started this he mentioned he wanted to get some exposer in the "everday average joe racer" arena.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: WILD BILL]
#650166
03/26/10 05:21 PM
03/26/10 05:21 PM
|
Joined: Feb 2004
Posts: 6,257
acworth / N. georgia - south e...
cheapstreetdustr
master
|
master
Joined: Feb 2004
Posts: 6,257
acworth / N. georgia - south e...
|
that thing made more power than the papers show.. all that exhaust gas in the cell...getting sucked back in... fresh air and the exhaust plumbed out the cell.. would show more power.. hard to believe at the levels its at now. but i believe it was running on used air..fwiw cheapst you gonna have some fun with that motor for sure.. youll be grabbin 2nd gear way sooner than your used too....get ready..
365" Iron J heads,,3480lbs best 1.39 60ft on SS springs.10.54,124 mph ...6.67 1/8th et.average 60fts 1.46 w/ small cam &.063 no2 pill tagged & insured
[image][/image]
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: cheapstreetdustr]
#650168
03/26/10 05:35 PM
03/26/10 05:35 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
that thing made more power than the papers show..
all that exhaust gas in the cell...getting sucked back in...
fresh air and the exhaust plumbed out the cell..
would show more power..
hard to believe at the levels its at now.
but i believe it was running on used air..fwiw
cheapst
Are you saying this becuase of the last video?
That video is not representative of how it was tested.
If you look closly at the pics I posted you can see a sliding door that houses an exhuast fan as well as an opening in the ceiling above the carb for fresh air. there are 2 tubes that come up to connect to the headers to direct the exhuast out.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: Verga]
#650171
03/26/10 07:18 PM
03/26/10 07:18 PM
|
Joined: Nov 2004
Posts: 2,825
Sk. Canada
RemCharger
master
|
master
Joined: Nov 2004
Posts: 2,825
Sk. Canada
|
Quote:
Those are impressive numbers!!
Am I the only 1 thinking that the sum of the parts would be around 550-575HP on gas?
And no you're not.
Remember the engine master shootout with 440s where, I believe it was Hughes, built a 750hp deal? They moved the cylinders around and other super tricks, With Indy(?) heads?
They were running gas, but still,,,
This motor really put a # up! Good job Bill/Koffels.
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: cheapstreetdustr]
#650172
03/26/10 07:35 PM
03/26/10 07:35 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Quote:
you uncorked it to hear it..?
hense the title .."fooling around"
cheapst.
Exactly
I figured you couldn't really hear it right shooting it from the other side of a wall
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: WILD BILL]
#650173
03/26/10 07:39 PM
03/26/10 07:39 PM
|
Joined: Jul 2003
Posts: 12,129
Cleveland
sunroofgtx
I Live Here
|
I Live Here
Joined: Jul 2003
Posts: 12,129
Cleveland
|
Scott, I forgot to tell you. When you were getting a screwdriver, I made a pull my way.. Way open !!! Look at Wild Bills mustache getting sucked into the carb !!!
Join the quickest team in motorsports. Team FireCore. CustomWiresets.com
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: sunroofgtx]
#650174
03/26/10 07:42 PM
03/26/10 07:42 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: sunroofgtx]
#650179
03/26/10 11:17 PM
03/26/10 11:17 PM
|
Joined: Sep 2007
Posts: 2,584
sycamore,ohio
BobsProFab
master
|
master
Joined: Sep 2007
Posts: 2,584
sycamore,ohio
|
Quote:
Bob, you are next !! A little bit different motor, though.
and i cant wait get them wires done yet
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: Quicktree]
#650182
03/27/10 08:27 PM
03/27/10 08:27 PM
|
Joined: May 2007
Posts: 1,675
Mi.
G-Money1320
top fuel
|
top fuel
Joined: May 2007
Posts: 1,675
Mi.
|
Awesome numbers Bill and Kudos to Scott for what he has done for you After all these years Scott still has it!!! Now the rest of the Wild family will look to step it up, dont go too far Larry, I like our competitive adventures at the track
416 stroker from Nick at Compu-flow. 11.14 in full street trim. Seems like a new best every time out.
11.06 open headers----so far!!
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: b1headman]
#650184
03/31/10 12:06 AM
03/31/10 12:06 AM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
I think I got the bay ready for it
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: WILD BILL]
#650185
03/31/10 12:21 AM
03/31/10 12:21 AM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
I think I got the bay ready for it
So go get it and put it in... damn it 
its taking up prime area
|
|
|
Re: Hitting the DYNO tomorrow ! What's it gonna make n
[Re: b1headman]
#650188
04/01/10 10:24 PM
04/01/10 10:24 PM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
OP
Senior Member of the Junior Dragster Club
|
OP
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Most power that mini ever had in it
To bad I couldn't get it all to the ground
|
|
|
|
|
Doorman
