torque per cube?

Print Thread

Re: torque per cube? [Re: gregsdart] #578447 01/11/10 09:45 PM 01/11/10 09:45 PM
Joined: Apr 2005 Posts: 1,106 Quebec, Canada D Diablo super stock
Diablo super stock D Joined: Apr 2005 Posts: 1,106 Quebec, Canada	I don't have much Dyno info on my 636ci since we only really ran it on there a few times to make sure everything was alright. Made 913 lb-ft@ 5700rpm (dyno didnt pull it down any lower) Made 801 lb-ft@ 7100rpm (didnt run it much higher then that on the dyno) Those numbers come in right around 1.4 per cube

Entire Thread
Subject	Posted By	Posted
torque per cube?	gregsdart	01/10/10 05:03 PM
Re: torque per cue?	blownzoom440	01/10/10 05:14 PM
Post deleted by Defbob	Anonymous	01/12/10 02:26 PM
Re: torque per cue?	gregsdart	01/12/10 02:31 PM
Re: torque per cube?	Old School	01/10/10 11:32 PM
Re: torque per cube?	HotRodDave	01/11/10 03:26 AM
Re: torque per cube?	Cab_Burge	01/11/10 03:37 AM
Re: torque per cube?	Al_Alguire	01/11/10 06:12 AM
Re: torque per cube?	dodgeboy11	01/11/10 06:29 AM
Re: torque per cube?	Bigcube	01/11/10 11:19 AM
Re: torque per cube?	gregsdart	01/11/10 04:12 PM
Re: torque per cube?	SportF	01/11/10 05:30 PM
Re: torque per cube?	Old School	01/11/10 05:35 PM
Re: torque per cube?	patrick	01/11/10 06:08 PM
Re: torque per cube?	MuscleMike	01/11/10 07:09 PM
Re: torque per cube?	MuscleMike	01/11/10 07:11 PM
Re: torque per cube?	Barnstorm	01/11/10 07:55 PM
Re: torque per cube?	street_dart	01/11/10 10:43 PM
Re: torque per cube?	B1Fish540	01/12/10 03:57 AM
Re: torque per cube?	G_bob	01/12/10 05:08 AM
Re: torque per cube?	dodgeboy11	01/12/10 05:44 AM
Re: torque per cube?	emarine01	01/12/10 02:02 PM
Re: torque per cube?	gregsdart	01/12/10 02:21 PM
Re: torque per cube?	Al_Alguire	01/14/10 05:09 AM
Re: torque per cube?	mr. 63plymouth	01/14/10 05:39 AM
Re: torque per cube?	Avenger	01/11/10 06:27 PM
Re: torque per cube?	gregsdart	01/11/10 06:42 PM
Re: torque per cube?	Old School	01/11/10 10:52 PM
Re: torque per cube?	gregsdart	01/12/10 01:19 AM
Re: torque per cube?	Diablo	01/12/10 01:45 AM
Re: torque per cube?	HotRodDave	01/12/10 04:21 PM
Re: torque per cube?	HotRodDave	01/12/10 04:30 PM
Re: torque per cube?	SportF	01/12/10 05:02 PM
Re: torque per cube?	emarine01	01/12/10 05:31 PM
Re: torque per cube?	gregsdart	01/12/10 06:36 PM
Re: torque per cube?	gregsdart	01/12/10 06:37 PM
Re: torque per cube?	B1Fish540	01/12/10 08:10 PM
Post deleted by Defbob	Anonymous	01/12/10 08:33 PM
Re: torque per cube?	mbogina	01/12/10 09:03 PM
Re: torque per cube?	MuscleMike	01/12/10 09:55 PM
Re: torque per cube?	blownzoom440	01/12/10 10:46 PM
Re: torque per cube?	B1Fish540	01/12/10 11:30 PM
Re: torque per cube?	572DartPost	01/12/10 11:57 PM
Re: torque per cube?	AndyF	01/14/10 05:28 AM
Re: torque per cube?	moper	01/14/10 04:55 PM
Re: torque per cube?	MuscleMike	01/14/10 05:45 PM
Re: torque per cube?	dodgeboy11	01/13/10 05:55 AM
Re: torque per cube?	MuscleMike	01/13/10 11:35 AM
Re: torque per cube?	SportF	01/13/10 12:45 PM
Re: torque per cube?	mbogina	01/13/10 11:32 PM
Re: torque per cube?	SportF	01/14/10 03:32 PM
Re: torque per cube?	supercomp	01/12/10 06:40 PM
Re: torque per cube?	dstryr	01/13/10 03:46 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To