If you want to know how much hp is possible for a reliable, street trim machine here!

http://www.b2cars.com/cars.php

That’s 9 sec ET’s on a normally aspirated, pump gas, street tires (not slicks with a couple of cuts in them to make them DOT legal), solid flat tappet .650 cam (not some un-street-able roller) and some decent gears so you don’t have to run it at 5000 RPM at 65 mph and the engine will last 20-30 thousand miles. But it’ll cost you around $200k!


This post is available in double vision where drunk.