K&G Engines CNC Port 906 Heads

Print Thread

Re: K&G Engines CNC Port 906 Heads [Re: parksr5] #2393837 10/27/17 03:14 PM 10/27/17 03:14 PM
Joined: Jan 2003 Posts: 14,499 So. Burlington, Vt. F fast68plymouth I Live Here
fast68plymouth I Live Here F Joined: Jan 2003 Posts: 14,499 So. Burlington, Vt.	That 511 ended up running 11.50's @118 in FAST trim in good air. With some M&H 28x7 retro style slicks it went 11-teens. The stock intake and ex manifolds really put the hurtin on the horsepower with that combo. 68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads

Entire Thread
Subject	Posted By	Posted
K&G Engines CNC Port 906 Heads	parksr5	10/13/17 01:45 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/13/17 01:47 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/13/17 01:48 AM
Re: K&G Engines CNC Port 906 Heads	sgcuda	10/13/17 02:24 AM
Re: K&G Engines CNC Port 906 Heads	madscientist	10/13/17 02:33 AM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/13/17 04:21 AM
Re: K&G Engines CNC Port 906 Heads	A/MP	10/13/17 04:29 AM
Re: K&G Engines CNC Port 906 Heads	BradH	10/13/17 02:50 PM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/13/17 03:03 PM
Re: K&G Engines CNC Port 906 Heads	GY3	10/13/17 04:16 PM
Re: K&G Engines CNC Port 906 Heads	an8sec70cuda	10/13/17 04:34 PM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/13/17 05:02 PM
Re: K&G Engines CNC Port 906 Heads	JohnRR	10/13/17 05:06 PM
Re: K&G Engines CNC Port 906 Heads	B3422W5	10/13/17 05:48 PM
Re: K&G Engines CNC Port 906 Heads	GTX MATT	10/13/17 06:10 PM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/13/17 10:18 PM
Re: K&G Engines CNC Port 906 Heads	Scully	10/20/17 07:27 AM
Re: K&G Engines CNC Port 906 Heads	RAMM	10/14/17 03:24 PM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/13/17 05:36 PM
Re: K&G Engines CNC Port 906 Heads	madscientist	10/13/17 05:49 PM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/13/17 06:06 PM
Re: K&G Engines CNC Port 906 Heads	68 HEMI GTS	10/13/17 11:55 PM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/14/17 01:14 AM
Re: K&G Engines CNC Port 906 Heads	DrCharles	10/14/17 12:32 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/14/17 02:16 AM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/14/17 01:17 AM
Re: K&G Engines CNC Port 906 Heads	A/MP	10/14/17 05:48 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/17/17 02:24 AM
Re: K&G Engines CNC Port 906 Heads	pittsburghracer	10/17/17 03:12 AM
Re: K&G Engines CNC Port 906 Heads	AndyF	10/17/17 03:27 AM
Re: K&G Engines CNC Port 906 Heads	bonefish	10/17/17 01:58 PM
Re: K&G Engines CNC Port 906 Heads	CSK	10/17/17 02:42 AM
Re: K&G Engines CNC Port 906 Heads	71yelladustr	10/18/17 02:20 PM
Re: K&G Engines CNC Port 906 Heads	shorthorse	10/20/17 06:47 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/24/17 04:31 AM
Re: K&G Engines CNC Port 906 Heads	BSB67	10/25/17 01:10 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/25/17 02:51 AM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/27/17 05:28 PM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/24/17 04:33 AM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/27/17 05:55 PM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/27/17 07:07 PM
Re: K&G Engines CNC Port 906 Heads	fast68plymouth	10/27/17 07:14 PM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/27/17 08:37 PM
Re: K&G Engines CNC Port 906 Heads	parksr5	10/28/17 03:12 AM
Re: K&G Engines CNC Port 906 Heads	markz528	10/28/17 03:38 AM
Re: K&G Engines CNC Port 906 Heads	BSB67	10/28/17 05:17 AM
Re: K&G Engines CNC Port 906 Heads	Gtxxjon	10/17/21 02:51 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To