Just for comparison, I noticed the strength rating on those studs are only 125,000 psi vs. what Hughes sells (I know, those are too short) that are rated at 170,000 psi.
Don't know what ARP's studs are, but I'd be curious if that 125,000 psi level is strong enough, considering the spring pressure you're going to run.
Just doing some math says these bolts will have a failure point of about 13800lbs, now assume 4:1 design margin and you have about 3450lbs working load limit. Back of napkin type math, but it gives an idea. S/F.....Ken M
