Quote:





Short of milling the rocker stands down and moving the shaft in 2 of the 3 axis, I do not see how it can be done. Please enlighten me so I can understand. J.Rob



Check it with an indicator and I'd be interested to know just what it is.

I will check it. I bet it is more than .050" sweep

What I neglected to say was after milling the stands down I would have to make blocks to space them up and out. I figured you would catch that-sorry.J.Rob

2009 PHR\EMC Competitor
2010 PHR\EMC Competitor
2011 PHR\EMC Competitor
2012 PHR\EMC Competitor
2013 PHR\EMC Competitor
2014 HotRod/EMC Competitor
2015 HotRod/EMC NoShow
2016 HotRod/EMC 3rd place SPEC Bigblock
2018 HotRod/EMC 7th place G3