Quote: What size bench does Chapman Flow on, and what is Dwayne using these days? I do recall Dwayne telling me ages ago, but I can't remember everything, lol. I do recall Dwayne's bench being conservative regardless.
AL...
actually the better question would be..
what size bore fixture was used?
what was the elevation, pressure?
airflow temps?
;these would be the biggest factors in seing different #s from one to another.
you have to understand conservative is relative.
now this is directed at no-one, just in general.
people have to understand.
proper bore fixture diameter, if not the same will show different results,too small for the heads application "can cause the stall" or lower peak #s
elevation in reguards to sea level is one of the biggest factors for the difference.
id say thats the biggest source of the confusion.
next would be the correction factors.to try to compensate..
just my 2 cents.
anyway
thats good flow in anyones book. id say it'll support "close to" 1000 hp, ive always liked those stage 6's seems they have been under the radar..
cheap..
365" Iron J heads,,3480lbs best 1.39 60ft on SS springs.10.54,124 mph ...6.67 1/8th et.average 60fts 1.46 w/ small cam &.063 no2 pill tagged & insured [image][/image]
