Quote:
heres how i did the master cyl. Wilwood 3/4" bore ~1,4" stroke.
https://board.moparts.org/ubbthreads/show...rue#Post6919352
Very nice work and very similar to what I did, difference is that I built a bracket that bolts to the frame to hold the MC. I also used a stock clutch rod, cut it off and welding on a end that was threaded to attach to MC. I am confident that this is all good, however I now am moving onto the TB and how to activate that. What TB (PN) did you use? Did you buy a kit or make it yourself? I am concerned with getting the adjustment correct (space between the TB and PP).
01 Viper GTS ACR 10 Challenger RT PCP 6spd 70 Challenger 440 6 pac 73 Cuda 416 Road Racer 70 Hemi Roadrunner 01 Ram 4x4 / 98 Ram 3500 91 Stealth RT 05 Durango Hemi 09 Caliber / 99 Dakota 4x4 / 52 Dodge B3B
|