Hey guys just dropped my 73 cuda off with a great friend, he is going to put togeather a 493 (mancini Kit) RB for me while Im over seas for the next year. Just wanted to see what you guys think about the build and what type of power it will make. This will be a street driven car that will see a lot of track time.

1973 440 Block
4.15 Eagle Crank & Rods
Diamond Flat Top Pistons
Stealth Heads (Cleaned Up & Gasket Matched)
Roller Rockers 1.5
Comp Cam, Solid Roller: .600 lift
Comp Solid Roller lifters
Eddy Victor intake (matched to heads)
950 carb
2" Primary Headers/Full 3" exhaust
3500 stall

Looking to get about 10.1 to 11.1 comp. Want to run on pump gas.

Dana 60 cut to B-Body specs and 3.73 or 4.10 gear & New HD Springs with 1" relo kit, also getting subframe connectors put on. Going to go with 10" wide rims with ET streets or a similar tire.

My friend who is building the engine and taking care of all my stuff suggested I might want to switch to a smaller non roller solid (.566 lift) cam for my build. What are your guys thoughts? Thanks in advance.



Don

Last edited by The Cuda Guy; 04/08/10 11:55 PM.