Ok...I'm quickly running out of energy...I think I have to quit my real job...
Today (day 5) my plan was to installing the engine, transmission, front suspension and front brakes...
That came to a sudden stop when I was assembling the bell housing/clutch.
I used the original flywheel that was in the car three years ago but replaced the scatter shield with the correct dated 513 bell housing....After putting the clutch together I found the starter wouldn't fit...
I quick call the BREWERS confirmed that I was trying to use an aftermarket 11" flywheel instead on the stock 10 1/2 deal.....valuable lesson learned. The correct one is being UPS'd as we speak.
confirmed that I was trying to use an aftermarket 11" flywheel instead on the stock 10 1/2 deal.....valuable lesson learned. The correct one is being UPS'd as we speak.
.JPG){kind=link}