So a bit of an "oldie but goodie" (in my book, heck, my project right? lol) update!

I figured I would post the finishing details here, in particular the port work as strangely enough when I was originally looking for pictures of prior work it was somewhat difficult to find...I'm talking close-up details, etc.

Take it for what it's worth, the LEGEND to track through the changes is as follows:

1) STOCK - this is the as-cast flow of my W2 Econo castings
- the only downside is that this was done on a different SF-300 bench, whereas the remaining testing was done on a different SF-600 bench

2) MP Template - result of me following the W2 MP porting templates

3) Valve Job - result of the machine shop doing a standard three angle valve job and a bit wider chamber wall cut to deshroud the valves

4) Blend - result of my additional porting work on SSR, and further blending in the chamber deshrouding cuts

I'll post the comparison of flow results first and finishing pics in the next update.