Yes this can be done but there are a few things that you need to make sure of before proceeding.
1. Make sure your cam is billet not cast, if Cast, don't do it. 2. Like INIMD8 said, tighten up the lash to almost nothing, .004 - .005 (I just spoke to Lunati last week and that is what they told me to do)
I'm considering the XR 286 HR-10 Comp, their website states billet steel. I'm aware of the lash and having to experiment with it.
Be careful, this Cam is on a cast core. I do have one here, can show pics if necessary. Obviously the data at comps HP is wrong.
