Originally Posted by RonP
Originally Posted by DemonDust
Originally Posted by Dragula
I knew someone would post that...I am looking for some actual feedback....The engines are under $15k, and I never see any in pro-street cars, only resto mods with a stick....


Ron Polidora put one in a 64 Dodge. Beautiful build.


Thanks

I have one in my 64 Dodge 440.
I did use a gerst front suspension. It is a 727 built by John cope. Car went 10.00 with lower only, but it was making just a touch over 11lbs (about factory boost) with the longtubes and free exhaust. With an upper, it has been 9.32 so far. 8's are coming.


9.32.....Wow....What computer are you using, and how did you mount the engine?


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk