Originally Posted By MR_P_BODY
Originally Posted By madscientist
Originally Posted By MR_P_BODY
Originally Posted By Porter67
You can get around that with a mopar crank, std. length rods and a off the shelf chevy piston, you can nail .035 above deck.


Why would I want to be .035 above the deck?
wave


I'm running mine .054 out of the deck. Would have been more but I'm on pump gas.


You sure didnt want any quench did ya
EDIT
I run a flat top piston with a 22cc dish with a .039
gasket to give me 10.6 compression(iron heads W-2s)
wave


It should be noted that I'm running a 3.313 stroke. So the math works out a bit different.

Just because you think it won't make it true. Horsepower is KING. To dispute this is stupid. C. Alston