Re: CNC'd ported vs hand ported heads: Discussion, long post
[Re: v cummins]
#1876084
07/22/15 09:23 PM
07/22/15 09:23 PM
|
Joined: Feb 2005
Posts: 20,195 PA.
pittsburghracer
OP
"Little"John
|
OP
"Little"John
Joined: Feb 2005
Posts: 20,195
PA.
|
My thought is there is no difference between CNC Ports versus Hand Ports. The bad part about hand porting is duplicating all the other holes. This took me about two weeks--not two days. As Mr. P Body states, having a good master is the key. If you copy a bad port, you wind up with a bad port. By hand porting, once you have a good intake and exhaust port, you have to humanly duplicate it by measuring; which is extremely difficult and very time consuming. But worth the time. That is why everyone with a grinder can't port heads. Very tedious time consuming work.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Entire Thread
|
CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/22/15 04:49 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Azzkikrcuda
|
07/22/15 05:12 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
MR_P_BODY
|
07/22/15 05:18 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
madscientist
|
07/22/15 05:47 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Thumperdart
|
07/22/15 06:28 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Stroker Scamp
|
07/22/15 06:43 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/22/15 03:13 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
camastomcat
|
07/22/15 06:26 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
CTD5.9
|
07/22/15 04:56 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/22/15 05:14 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
tboomer
|
07/22/15 05:45 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/22/15 05:58 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
cudaman1969
|
07/22/15 08:49 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
gregsdart
|
07/23/15 01:26 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
madscientist
|
07/22/15 05:44 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
CTD5.9
|
07/22/15 06:21 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
AndyF
|
07/22/15 06:27 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Streetwize
|
07/22/15 06:38 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/22/15 08:23 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
MR_P_BODY
|
07/22/15 08:37 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
BradH
|
07/22/15 08:37 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
AndyF
|
07/22/15 09:22 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Porter67
|
07/22/15 09:14 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
HotRodDave
|
07/22/15 09:43 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
BradH
|
07/22/15 10:25 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
v cummins
|
07/22/15 11:31 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 01:23 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Hot 340
|
07/22/15 11:22 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
madscientist
|
07/23/15 02:34 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
FastOne
|
07/23/15 04:45 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
sixpackgut
|
07/22/15 11:51 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
B3422W5
|
07/23/15 12:06 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
sixpackgut
|
07/23/15 12:24 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
B3422W5
|
07/23/15 12:34 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Porter67
|
07/23/15 12:19 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
sixpackgut
|
07/23/15 12:30 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Duner
|
07/23/15 04:51 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 05:06 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Duner
|
07/23/15 05:09 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 05:15 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
CDoering
|
07/23/15 05:37 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
jcc
|
07/23/15 05:52 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 06:05 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
madscientist
|
07/23/15 06:23 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
CDoering
|
07/23/15 06:28 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
LA360
|
07/23/15 08:58 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
383man
|
07/23/15 10:25 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Hot 340
|
07/23/15 11:44 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
BradH
|
07/24/15 12:36 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Hot 340
|
07/24/15 12:57 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
madscientist
|
07/23/15 06:22 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
jcc
|
07/23/15 04:28 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/25/15 01:49 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Hot 340
|
07/25/15 02:09 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
W5DART66
|
07/25/15 02:25 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
W5DART66
|
07/25/15 02:43 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
W5DART66
|
07/25/15 02:46 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
AndyF
|
07/26/15 07:08 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
dartman366
|
07/26/15 10:23 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
MR_P_BODY
|
07/25/15 03:07 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Brian Hafliger
|
07/25/15 07:33 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
EchoSixMike
|
07/23/15 12:16 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 02:47 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
EchoSixMike
|
07/24/15 03:14 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
madscientist
|
07/23/15 04:32 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 05:07 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
MR_P_BODY
|
07/23/15 10:23 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
cudaman1969
|
07/24/15 12:01 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
BradH
|
07/24/15 12:43 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
EchoSixMike
|
07/24/15 03:28 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
rt66jim
|
07/23/15 03:17 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/23/15 03:56 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
B G Racing
|
07/24/15 03:23 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/24/15 05:58 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Hot 340
|
07/24/15 06:14 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/24/15 06:20 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
cudaman1969
|
07/24/15 11:35 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/24/15 11:39 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
rt66jim
|
07/25/15 12:37 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
LA360
|
07/25/15 03:27 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
B3422W5
|
07/25/15 03:48 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
rt66jim
|
07/25/15 05:13 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
polyspheric
|
07/26/15 03:14 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/26/15 03:30 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
polyspheric
|
07/26/15 07:03 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
AndyF
|
07/27/15 05:38 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
MR_P_BODY
|
07/27/15 06:27 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
EchoSixMike
|
07/27/15 06:58 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Porter67
|
07/27/15 01:47 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/27/15 02:37 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
B3422W5
|
07/27/15 04:34 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/27/15 05:19 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
PorkyPig
|
07/29/15 12:49 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Brian Hafliger
|
07/29/15 05:03 AM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
pittsburghracer
|
07/29/15 01:28 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
justinp61
|
07/27/15 03:01 PM
|
Re: CNC'd ported vs hand ported heads: Discussion, long post
|
Porter67
|
07/27/15 04:39 PM
|
|
|
|