Quote:
Quote:
H-beams don't fail either?
The assertion that an H is a better piece from these chinese factories is great folly. Seen more failed H beam rods than Scat I beams.
thats because the H beam is probably used about 90 to 1 vs the I beam. so you honestly think The scat I beam is a better rod than the H?  and if the H is that big of a failure what do you think the I will do 
Boy.... You truly are hard headed, aren't you? And continue to miss the point.
An H beam rod of XX material has NO advantage over an I beam rod of the same XX material. It becomes the weight and quality of forging, and the material used.
This post started about the Eagle SIR rod compared to the Scat I beam
In the case of those two rods, the Scat is made out of better material.
You can get great H beam rods that will live at 2000 horsepower. You can get I beam rods that will live at 2000 horsepower also.
You seem to have this warped thought that an I beam is inherently weak, and an H beam inherently strong....... Your wrong
Last edited by B3422W5; 07/07/14 03:58 PM.
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, low 10.30’s 1/4
1.41 best 60 foot
6.56 at 104.17
| 
