Its a stage V dual carb intake. Known as the RAT BUSTER.

I redid this once more. I put silicone both sides.

I torqued it down per the Mopar HEMI BIBLE and we'll see if this time around it seals.

The oil is seeping through from the intake to head joint. When I take out the carbs this intake is big enough to let me see that there is oil right at the seam between the intake and heads. every time is the same. Its the first time im using silicone on both sides of the gasket....lets see how it holds up this time....

I also put some goo on the outside bottom of the intake port so it seals up with the intake when torqued down, I hope it helps sealing...