Quote: your bodyman knows what he says when he told you to keep them off the exterior sheetmetal. Blasting warps. Period. Even if somebody tells me they can blast without warping I say "no thanks" I wont risk warping nice original sheetmetal. Id rather spend some time sanding than trying to fix wavy panels afterwards and having to use bondo (noooo!!!noo! nooooo!!!!).
Domingo. if i can blast a coke can and not warp it i can blast your sheetmetal. there are different medias for different jobs! I do not blast equipment and structural steel i blast vehicles. Might want to research some more options before saying all blasting warps.
Is that an empty can? If so, I would be impressed.
Yes it's an empty can... question is was the can empty the whole time it was being blasted.... Not just while you touch around the pull tab...... I've seen those cans at blast company displays, I've also seen them warp panels... Not as bad as the typical sand blaster but stuff your see trying to block a straight panel that takes extra priming... That just happens to be linear in the same direction as the blasting was preformed...
