well shes all back together and working great! but not without a ton of what the f--ks. i took a members advise and fit the trans without the plate disc and wheel and it fit perfect. now get this... when it was out i fit the disc on the splines and it fit great. i installed the clutch and when i installed the trans it would not go in. after a couple days not sleeping and thinking what the fffff. it just made no sense. then i looked at the clutch alignment tool.... it said "made in china". as we know the disc needs to be perfect for everything to slip in perfect. so what i did was loosen the plate bolts so the disc was free and with the trans in place and after the bolts were loose she slide right in. you guys helped alot and one thing i can say to help you all is....stay away from the chinese crap