Headlight Buckets
Well I've got a few things on the go and trying not to get too far ahead of myself, been working on the rear leaf springs, rear brakes, heater box and headlight buckets. For now I'm concentrating on the headlight assembly and the heater box. So here are some pics of the start of my headlight and accessories re-fresh.

Drivers side fender with assembly attached:


Removed... not much to it, four bolts I'll bag those and clean them up later.


Took a bunch of shots of the position of everything for later:


Before cleaning, discovered the part numbers and paint marks, looks like we have red, orange and blue and I think black on the different cups, I have to record them:


Here's HI-LO-5-RT-.122 after a bath:


Here's one of the mounts after a little sanding and a few coats of Eastwood's Underhood Black Paint.


Next I'll finish cleaning the other parts, install the new headlight screws and hardware, reproduce the coloured stripes on the cups, polish the headlight rings and install the new sealed beams.