Those spark plug wire holders on the valve covers are obviously repro's because they are too white. The oil dip stick spear covering is too white also. Originally it was a pretty creamish looking white. You are missing the embossed "M" on your oil filter. I can't quite tell in your picture, but it is a common mistake I see is that the nut on the PVC is supposed to be a solid one. A lot of people use a stamped one by mistake. I have never seen that strap on the choke, so I wouldn't ever put one on. They did have a piece of tape over the choke cap originally so that I would do. It is quite common to find traces of orange paint on the valve cover edges and the plug wires as others have stated. Otherwise, it looks superb!