whats the cost of back cut, valve job and bowl blend?
Starting with new** stealth heads........
-disassemble
-measure guides *
-machine and finish grind seats
-back cut valves
-blend bowls
-flow test one cylinder
-jet wash heads
-test springs
-reassemble heads
——————
$450
*if guides need honing it will be an extra charge
**Used heads will need to be jet washed and bead blasted prior to the seats being cut and bowls blended, and the valves will also need to be cleaned, bead blasted, and refaced..... all of which will add $150 to the total.
