I was measuring the end play yesterday and I didnt
like what I had.. the spec is .022-.091.. I was at
.085... I wanted to get back to about .045 or so..
I have the thickest thrust washer on the back of
the pump.. I am going to change the triangled shape
one on the front of the intermediate shaft.. with
that one I can tighten it up by .020... this would
put me at about .065 end play.. I can deal with that
I have the hardest time to get all the clutches to
line up when I drop the forward drum in.. I spent
over a hour to get the last disc to line up... it
need to drop down a little farther into the lugs..
what a PITA