10.50's sounds great until you read guys going 9.30's with one with a bigger bore..I could change cams and go from the very mild .590 solid back to a .740 roller if I want to run 9's, but streeting it will kill the valve train. If I could run the Barton valve train, then maybe we would move up in cam. Oiling the top end can be an issue.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk