Not great pics info - but this is the "flat" side of te dip stick - u can see it shows I need about a quart top up - this side faces the crank - and I verified verified it as accurate.



This is the " other" side - which faces the edge of the pan when inserted - not a great pic but it shows a much higher level due to the angle of insertion.

The issue here is the lip of the oan pushes the dipstick away from the " vertical" and changes the angle of insertion.

Just a heads up to make sure you make a careful note of your oil level against a "known" quantity - and not rely on this aftermarket sh1t