Quote:

---

stock tank, new fuel lines, 3/8" to the pump, 5/16" to the carbs.

now, before anyone jumps all over that as not enough, i'm going by what tim banning does. he uses this setup on all his 572, 750+ HP street bemis, unless the customer asks for something different. it certainly is possible that in my case it isn't enough, and if so i'll figure that out and change it, but there is a proven track record of this combo working, so until i prove it isn't, i'll stick with it.

it looks to me like for whatever reason, the carbs were holding out well against that 10psi most of the time, as it really didn't run differently with the regulator in place.

---

Sounds like you`re stuck on this because of what someone else does and IF it works that`s fine but if it doesn`t then you have problems. STREET HEMIS.......... You mean "non raced" poser hemis? Don`t have much to say except if it was my deal I`d put a real(elec.)pump w/some volume and some big azz fuel lines and let that thing eat..........that`s just me heck my 360 liked 1/2" lines and a bigger pump and it only went high 11`s. Hope u figre it out cos I think I already did unless you have some mechanical issues...........