Quote: Check out the Ford cam sensor from a '90s OHC motor. It's simple.
R.
Exactly what I was gonna mention, you need to plug the distributor hole anyway, the Ford design does that pretty cleanly...
I thought the same thing when I pulled this while rebuiling a ford 3.0 at work. It even has the same hex drive for the oil pump shaft. Hall effect w/2 pin plug, 5.030" OD shaft.....Might be easier/cleaner to mod one of these than fab something from scratch. Ford 5.0/4.0 and 3.0 pushrod motors all used them.
