Quote: I'm running pretty much the same front kit on an E... just a few years older. The front calipers have a relatively small piston area and like lots of pressure. With the Bear suplied master and a 9" single diaphram booster brake pressure is barely adequate. Front/rear bias on mine is OK with 11" rear drums and the prop valve adjusted all the way out. I'm betting you will want the smaller diameter master after you try it out.
On my setup, I might try a smaller master but don't think that will be enough. Dual diaphram or hydro boost is in my future I think.
+1, got the same setup from Doctor Diff, Awsome quality but I had to go with 7/8 master and yellow stuff pads to make them decent. Next step will be dual booster and I will remove my proportionning valve as well. You might want to do it before you bleed your system.
