Re: help with 904 band adjust !
[Re: moparjimbo60]
#954384
03/20/11 11:19 AM
03/20/11 11:19 AM
|
Joined: Jan 2004
Posts: 13,247 Mt. Vernon, Ohio
dartman366
I Live Here
|
I Live Here
Joined: Jan 2004
Posts: 13,247
Mt. Vernon, Ohio
|
did it do it before the adjustment? if not then just back it off 1/8 to a 1/4 turn and see if it goes away, usually it is a 2-3 shift overlap/flare up problem, how is your tranny built? stock, rebuilt with good part's?
Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.
|
|
|
Re: help with 904 band adjust !
[Re: moparjimbo60]
#954388
03/20/11 11:45 AM
03/20/11 11:45 AM
|
Joined: Jul 2008
Posts: 30,431 Florida STAYcation
BeEtLeJuIcE !
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,431
Florida STAYcation
|
Quote:
i dont have an inch # wrench ,just always snug up then back off 2 and ahalf. but snug is a relative term.
"snug" ? ... .... I have just done-it with a little-bitty open-end wrench USING the tip-O-my-finger
|
|
|
Re: help with 904 band adjust !
[Re: moparjimbo60]
#954390
03/20/11 01:42 PM
03/20/11 01:42 PM
|
Joined: Mar 2008
Posts: 5,746 Ontario, Canada
Dodgem
master
|
master
Joined: Mar 2008
Posts: 5,746
Ontario, Canada
|
My experience it does that when the band is too loose going into second tighten 1/2 turn and try again. higher number kickdown levers 4.2 or 5.0 do not like to much play. 72 inch pounds 6 lbs is pretty tight so the wrist snug thing I go 1.5 turns back.
Last edited by Dodgem; 03/20/11 01:43 PM.
|
|
|
Re: help with 904 band adjust !
[Re: moparjimbo60]
#954391
03/20/11 04:02 PM
03/20/11 04:02 PM
|
Joined: Jan 2003
Posts: 25,817 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 25,817
Rio Linda, CA
|
Does the valve body have LBA? What type of rear band, solid or double wrap?
If you have overlap on the 1-2 shift with a LBA valve body chances are the rear band is too tight, double wrap needs to be looser than 2 turns out.
The INTERNET, the MISinformation superhighway
|
|
|
Re: help with 904 band adjust !
[Re: moparjimbo60]
#954393
03/20/11 07:09 PM
03/20/11 07:09 PM
|
Joined: Jan 2004
Posts: 13,247 Mt. Vernon, Ohio
dartman366
I Live Here
|
I Live Here
Joined: Jan 2004
Posts: 13,247
Mt. Vernon, Ohio
|
Quote:
turbo action trans brake valve body, has a solid band . so am i too loose or too tight you think ?
too tight, like I said before back it off 1/4 turn and try it again and see if there is an improvement, I adjust mine as tight as my finger's will turn the stud in the center and back it off 1 and 1/2 turn's, I run a TA valvebody with a 4.2 lever.
Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.
|
|
|
Re: help with 904 band adjust !
[Re: moparjimbo60]
#954396
03/20/11 10:47 PM
03/20/11 10:47 PM
|
Joined: Nov 2004
Posts: 7,274 s.w.fl
bonefish
master
|
master
Joined: Nov 2004
Posts: 7,274
s.w.fl
|
Quote:
thanks sooo much for the advice . im fixing it tommorow . you guys are the BOMB !
let us know how it works.
|
|
|
|
|