Hi All,

I have a query on my mate's 360 I hope you can answer.

Specs;
Stock stroke,
Approx 12:1,
.650 lift cam, duration is 270 @ 50.
W2 Heads

The issue is that the rocker arm for the #3 intake is dry (i.e. no oil) all others seem to be well lubricated. In particular the area where the pushrod and adjusting nut come together.

All rocker arms are adjusted pretty much the same however this arm has a bit more thread showing than the others. They are either crane or mopar aluminium anodized rockers(cant remember right now).

He's just had it apart and checked alignment of oil holes etc, no blockages etc, but still that particular arm has no oil.

He's using Penrite HPR 30 oil and has about 70 psi hot at idle (~1100rpm).

There is a restrictor tube in the rhs lifter gallery.

Any ideas/suggestions???