Quote:

Quote:

The better the head the less cam you need ?? Where do did you learn this ??

Please explain your thought process. I will first.

The bigger isn't better with stock cams, you can do a better valve job, blah, blah, blah ...
The better the head the less cam you need ?? Ok let's put a B1 head on a 76 440 ?? The point here is the bigger and better the head the less port flow speed you have which makes the engine a pig down low. With stock cams to much head flow will kill the performance.



Boy, you just keep reading sh!t that just isn't there, don't you !!!

I said BETTER not BIGGER! Two different things. The 'Source head is a BETTER head, flows better, higher CR, lighter, etc.. But one thing it is NOT is BIGGER - unlike your ridiculous example of putting a B1 head on a stock motor !!!




What I'm simply saying is that it's not worth the added cost of the heads if your not going to take advantage of the added performance by putting a better camshaft,and adding compression to your engine to see the gains. Again you have to have a camshaft that can support the head your putting on the engine, if the cam is too small it cannot support a better flowing head and performance suffers.
It's not worth getting all worked up about..


logan426