Quote:

535.62 HP

669.1 FT LBS

Nice build, glad to see shes getting close!!







That's about what my old motor made

Here's the specs on that one

Quote:

440, .030 over
cast crank
6LY rods
hyper pistons sitting .070 in the hole
CR is 8.6 to 1

OOTB Eddy heads (Intake Valve Diameter (in) 2.140 in. Exhaust Valve Diameter (in) 1.810 in.)

Cam, (solid lift)
Intake Valve Lift with 1.5 Ratio 0.555 in.
Exhaust Valve Lift with 1.5 Ratio 0.555 in.
Duration at 050 inch Lift 262 int./262 exh.
Did NOT degree it in just lined up the dots but..
Lobe Separation (degrees) 110
Intake Centerline: 106

Team G intake

750 BG claw (running 110 oct)

MSD dist locked out @ 38*s

2 1/8 hooker SC headers.




And it's sheet