When installing torsion bars, where should the arm/cam (that the adjusting bolt pushes on in the lca) be positioned when you slide the bar into the lca hex socket? When I installed my torsion bars a while back I wasn't aware that those arms/cams were supposed to be clocked in a certain position. I was setting my ride height this past week and once I got it set, the torsion bar adjuster bolts were sticking way out of the LCAs. Apparently, the arms/cams were tipped all the way down in the lca when I put the torsion bars in place so now I am in the process of taking everything apart to reposition them correctly. I managed to get the driver side torsion bar out but I am having a very hard time getting the passenger side out.