Originally Posted by TJP
After evaluating things a bit further and talking with the owner I am going to relocate the ball stud on the BH bracket unless Someone chimes in with a solution. The owner is running out of $$ and I am already buried in this. Not the solution I would prefer but an easily reversible one at a later time.
I will update once the car is drivable up
thanks to all that have contributed beer


Loosened up the motor mount bracket bolts that attach it to the block, leave them slightly loose.

Raise the engine then tighten the bracket bolts. Leave the motor mount to k frame nuts loose slightly and raise the insulator too. This may get you what you need.